Carlo Gavazzi WM3-96 - Manual (Page 11)

▲ ▲
12
Displaying of the variables
7
Page 00 System
7 14
To reset all the events press the key, to continue the reset
procedure press the key: to exit from the reset procedure
press the key.
❑
Pass "999": energy consumption storage (Only if the
RS232+RTC module is present)
The RS232+RTC module allows also the storage of the energy
consumption of the previous two months. To enter this func-
tion, press the
key: when the instrument asks for the pass
code , set the value "999": the instrument
shows you the page where all the information are stored.
Control type:
alarm (e.g. A2),
diagnostics (e.g. D1),
maximum value (MAX),
minimum value (MIN). Only for alarms and diag-
nostics: detection of the
abnormal condition (ON)
or return to the normal con-
dition (OFF).
Variable being
controlled.
Alarms: value of
the ON alarm;
Max and MIN log-
ging: maximum
and minimum
measured values.
Date of the
event. Time of the
event.