Sending an email using a group number – Dell 2335DN User Manual
Page 142
Press Scroll (
or
) to display Delete and then press Select (
) to delete the e-mail
address(es) in the group.
Sending an Email using a Group Number
NOTE:
You can also send an email using an group number in Scan
Group Mail .
Load the document(s) face up with top edge in first into the DADF.
1.
OR
Place a single document face down on the document glass.
For details about loading a document, see "Adjusting the Document Contrast" .
Press Directory ( ) in the operator panel.
2.
Press Scroll (
or
) to highlight Email and then press Select (
).
3.
Press Scroll (
or
) to highlight Group Mail and then press Select (
).
4.
Press Scroll (
or
) to highlight Send and then press Select (
).
5.
Enter the sender's name and then press Select (
).
6.
The e-mail address you have assigned for the name appears. Press Select (
).
7.
The display asks you if you want to send e-mail to yourself.
8.
Select Yes or No and then press Select (
).
Enter the group location number and then press Select (
).
9.
The display asks if you want to review addresses.
10.
Press Scroll (
or
) to review addresses, press Select (
) to select Yes and check the
address you have entered.
To continue to the next setup, press Scroll (
or
) to select No and then press Select (
).
Enter the email subject and then press Select (
).
11.
Press Scroll (
or
) to select the file type to which the scanned image may be converted and then
12.