Selecting country, Power save mode – Dell 2335DN User Manual
Page 25
5.
Press Cancel (
) to return to the Standby mode.
6.
Selecting Country
To change the country that appears on the operator panel, follow these steps:
Press Scroll ( or ) to highlight Setup and then press Select (
).
1.
Press Scroll (
or
) to highlight Machine Setup and then press Select (
).
2.
Press Scroll (
or
) to highlight Select Country and then press Select (
).
3.
Press Scroll (
or
) to display the country you want and then press Select (
).
4.
Press Cancel (
) to return to the Standby mode.
5.
Power Save Mode
The Power Save mode enables your printer to reduce power consumption when it is not in actual use. You
can enable this mode by selecting the duration for which the printer waits after a job is printed before it
switches to a reduced power state.
Press Scroll ( or ) to highlight Setup and then press Select (
).
1.
Press Scroll (
or
) to highlight Machine Setup and then press Select (
).
2.
Press Scroll (
or
) to highlight Print Power Save and press Select (
).
3.
Press Scroll (
or
) to display the time settings you want.
4.
The available options are 5, 10, 15, 30, 60 and 120 (minutes).
The factory default setting is 30 minutes.
Press Select (
) to save the selection.
5.
Press Cancel (
) to return to the Standby mode.
6.