Putting into operation, 1 installing the belt grinder, 2 assembling the belt grinder – Dick SM-140 UltraSharp 230V User Manual
Page 16
Belt grinder SM-140
16
Putting into operation
7
7. Putting into operation
7.1
Installing the belt grinder
7.2
Assembling the belt grinder
WARNING
Risk of injuries in the event of slipping, falling or tilting belt
grinder
• Install the belt grinder on a stable table or other stand or
substructure, which has sufficient stability to carry the weight
of the belt grinder.
• The stand must not be mobile or fitted with wheels or castors.
• Install the belt grinder on a flat, slip-proof surface so that the
belt grinder does not slip, tilt or otherwise move when used.
CAUTION
Note the ergonomic requirements
• The machine must be installed in such a way that safe
working is possible for a person in an upright position.
• Ensure good lighting is provided at the workplace.
Figure 7.1 – Installation
[1] Machine base
1