Dick SM-140 UltraSharp 230V - Manual (Page 32)

Belt grinder SM-140 32
Servicing and maintenance
9
9.3 Changing the polishing wheel
The polishing wheel must be replaced if the distance between the
deflection plate and polishing wheel can no longer be adjusted
(see "Adjusting the deflector plate" on page 17).
1 Undo the fastening screws [1] of the cover [2],
2 Remove the cover [2],
3 Undo the fastening nuts [3] of the flange cover [4]
(right-hand thread),
4 Remove the flange cover [4],
5 Replace the polishing wheel [5].
6 Install the individual parts in the reverse order.
Figure 9.3 – Polishing wheel
Replace the polishing wheel as follows:
[1] Fastening screws for cover
[2] Cover
[3] Fastening nut
[4] Flange cover
[5] Polishing wheel
1 2 3 4 5