Dick SM-140 UltraSharp 230V - Manual (Page 21)

Belt grinder SM-140 21
Putting into operation
7
7.7 Switching on the belt grinder
WARNING
Risk of injury due to damaged or incorrectly mounted
machine parts
Using the belt grinder with damaged electric parts or power
cables can cause injuries due to electric shocks or malfunctions.
Damaged grinding belts can be partly spun off the machine.
• Missing or damaged covers expose rotating parts and can
cause injuries due to crushing and drawing in. Check the belt
grinder for damage before each use, in particular:
- the grinding belt,
- the polishing wheel,
- the power cable,
- correct assembly and covering function of all covers and
the housing,
- the function of the switches.
• Replace damaged parts before using the belt grinder again.
CAUTION
Risk of injuries due to poor health of the operator
Lack of concentration, over-tiredness, illness, drunkenness or leg
or arm disabilities as well as mental disabilities cause a high risk
of injuries.
• People who work at the belt grinder must be healthy and
capable of concentrating.
• Before starting work at the belt grinder, ensure you are in
a stable position in which you can maintain your balance
without any effort.
• When grinding and polishing, do not look away from the belt
grinder and workpiece.