284 wheels and tires – FORD 2014 Mustang v.2 User Manual

Page 285

Advertising
background image

WARNING: Always use the jack provided as original equipment
with your vehicle. If using a jack other than the one provided as

original equipment with your vehicle, make sure the jack capacity is
adequate for the vehicle weight, including any vehicle cargo or
modifications.

Note: Passengers should not remain in the vehicle when the vehicle is
being jacked.

1. Park on a level surface, set the parking brake and activate the hazard
flashers.

2. Place the transmission selector lever in position P or N and turn the
engine off.

3. Block both the front and rear of
the wheel diagonally opposite the flat
tire. For example, if the left front tire
is flat, block the right rear wheel.

4. Remove the lug wrench, spare
tire and jack.

5. Remove the center ornament from
the wheel. Loosen each wheel lug nut
one-half turn counterclockwise but do
not remove them until the wheel is
raised off the ground.

284

Wheels and Tires

2014 05+ Mustang (197)
Owners Guide gf, 2nd Printing, May 2013
USA
(fus)

Advertising