Creating a mykey, Creating, Mykey 59 – FORD 2014 Mustang v.2 User Manual

Page 60

Advertising
background image

• Audio system maximum volume of 45%. A message will be shown in

the display when you attempt to exceed the limited volume. Also, the
speed-sensitive or compensated automatic volume control will be
disabled.

• Always on setting. When this is selected, you will not be able to turn

off AdvanceTrac (if your vehicle is equipped with this feature).

CREATING A MYKEY

Use the information display to create a MyKey.

For Type 1 information displays:
1. Insert the key you want to program into the ignition.
2. Switch the ignition on.
3. Access the main menu within the information display, and press

SETUP using the information display button until PRESS RESET
TO CREATE MYKEY
displays.

4. Press and release the RESET button. The message HOLD RESET

TO CONFIRM MYKEY will display.

5. Press and hold the RESET button for two seconds until MARK

THIS AS RESTRICTED displays. Wait until KEY RESTRICTED
AT NEXT START
displays, confirming that your key is successfully
created.

Make sure you label your key so you can distinguish it from the admin
keys.

For Type 2 information display controls:
1. Insert the key you want to program into the ignition.
2. Switch the ignition on.
3. From the main menu within the information display, use the right

arrow key > or OK to select SETTING and then MYKEY.

4. Press > or OK to select CREATE MYKEY.
5. Hold OK as prompted until you see MARK THIS KEY AS

RESTRICTED in the information display screen.

The key is successfully created. Make sure you label it so you can
distinguish it from the admin keys.

You can also program configurable settings for the key(s). Refer to the
Programming/Changing Optional Settings section .

MyKey

59

2014 05+ Mustang (197)
Owners Guide gf, 2nd Printing, May 2013
USA
(fus)

Advertising