Replacing headlamp bulbs, Maintenance 297 – FORD 2013 Edge v.1 User Manual

Page 297

Advertising
background image

Examples of acceptable condensation are:
• Presence of thin mist (no streaks, drip marks or droplets)
• Fine mist covers less than 50% of the lens
Examples of unacceptable moisture (usually caused by a lamp water
leak) are:
• Water puddle inside the lamp
• Large water droplets, drip marks or streaks present on the interior of

the lens

Take your vehicle to a dealer for service if any of the above conditions of
unacceptable moisture are present.

Replacing headlamp bulbs

WARNING: Handle a halogen headlamp bulb carefully and keep
out of children’s reach. Grasp the bulb only by its plastic base and

do not touch the glass. The oil from your hand could cause the bulb to
break the next time the headlamps are operated.

Note: If the bulb is accidentally touched, it should be cleaned with
rubbing alcohol before being used.

1. Make sure that the headlamp control is in the off position.

2. Open the hood.

3. Remove the bulb cover.

Maintenance

297

2013 Edge (edg)
Owners Guide gf, 1st Printing
USA
(fus)

Advertising