Replacing the battery, Integrated keyhead transmitter, Keys and remote control 57 – FORD 2013 Edge v.1 User Manual

Page 57

Advertising
background image

The intelligent access key also
contains a removable mechanical key
blade that can be used to unlock the
driver door. Slide the release on the
back of the transmitter to release the
key blade, then pull the blade out.

Note: Your vehicle’s back-up keys
were issued with a security tag that
provides important vehicle key cut
information. Keep the tag in a safe
place for future reference.

Replacing the Battery

Note: Refer to local regulations when disposing of transmitter batteries.

Note: Do not wipe off any grease on the battery terminals or on the back
surface of the circuit board.

Note: Replacing the battery will not delete the transmitter from the
vehicle. The transmitter should operate normally.

The remote control uses one coin-type three-volt lithium battery CR2032
or equivalent.

Integrated Keyhead Transmitter

1. Twist a thin coin in the slot near the key
ring to remove the battery cover (1).

2. Carefully peel up the rubber gasket (2) from the transmitter if it does
not come off with battery cover.

3. Remove the old battery (3).

3

2

1

Keys and Remote Control

57

2013 Edge (edg)
Owners Guide gf, 1st Printing
USA
(fus)

Advertising