Bluetooth audio voice commands, A/v inputs, Myford touch™ (if equipped) 457 – FORD 2013 Edge v.1 User Manual

Page 457

Advertising
background image

Bluetooth Audio Voice Commands

If you are listening to a Bluetooth Audio device, press the voice
button on the steering wheel controls. When prompted, say any
of the commands in the following chart.

If you are not listening to a Bluetooth Audio device, press the voice
button and, after the tone, say “Bluetooth Audio”, then any of the
commands in the following chart.

Bluetooth audio voice commands

“Next”

“Pause”

“Play”

“Previous”

“Help”

A/V Inputs

Your A/V inputs allow you to connect an
auxiliary audio/video source (game
systems, personal camcorders, etc.) by
connecting RCA cords (not included) to
these input jacks. The jacks are yellow,
red and white and are located either
behind a small access door on the

instrument panel or in your center console.

You can also use the A/V inputs as an auxiliary input jack (AIJ) to play
music from your portable music player over your vehicle’s speakers. Plug
in your 1/8 in. (3.5 mm) RCA adapter into the two left A/V input jacks
(red and white).

Press the lower left corner of the touchscreen, then, select A/V inputs.

To use the auxiliary input jack feature, make sure that your portable
music player is designed to be used with headphones and that it is fully
charged. You also need an audio extension cable with stereo male 1/8 in.
(3.5 mm) connectors at one end and a RCA jack at the other.
1. Begin with the vehicle parked and the radio and portable device are

turned off.

2. Attach one end of the audio extension cable to the headphone output

of your player and the other end into the adaptor in one of the two
left A/V input jacks (white or red) inside the center console.

MyFord Touch™ (If Equipped)

457

2013 Edge (edg)
Owners Guide gf, 1st Printing
USA
(fus)

Advertising