FORD 2013 Edge v.1 - Manual (Page 390)

If you select: You can:
Connect Bluetooth
Device Connect a previously paired Bluetooth-enabled
phone.
1. Press OK to select and view a list of previously
paired phones.
2. Scroll until the desired device is chosen, then
press OK to connect the phone.
Note: Only one device can be connected at a
time. When another phone is connected, the
previous one is disconnected.
Set As Primary
Phone? Set a previously paired phone as your primary
phone.
Press OK to select and scroll to select the desired
phone. Press OK to confirm
Note: SYNC attempts to connect with the
primary phone at every ignition cycle. When a
phone is selected as primary, it appears first in
the list and is marked with an *.
Set Bluetooth On/Off Turn the Bluetooth feature on and off.
Press OK and scroll to toggle between On and
Off. When the desired selection is chosen, press
OK.
Note: Turning Bluetooth off disconnects all
Bluetooth devices and deactivates all Bluetooth
features.
Delete Device Delete a paired phone.
Press OK and scroll to select the device. Press
OK to confirm.
Delete All Devices Delete all previously paired phones (and all
information originally saved with those phones).
Press OK to select.
Return Exit the current menu.
1 This is a speed-dependent feature.
Advanced Menu Options
This menu allows you to access settings such as prompts, languages,
defaults, perform a master reset, install an application and view system
information.
1. Press the phone button to enter the Phone Menu.
2. Scroll until System Settings appears and press OK.
390 SYNC
ா
2013 Edge (edg)
Owners Guide gf, 1st Printing
USA (fus)