FORD 2013 Edge v.3 - Manual (Page 215)

Note: It is your responsibility to stay alert, drive safely and be in control
of the vehicle at all times.
The system will automatically adjust your speed to maintain a proper
distance between you and the vehicle in front of you in the same lane.
You can select from one of four GAP settings. The controls are located
on the steering wheel.
At startup, the system sets the gap to the last selected setting. Once
activated, you can deactivate the system at any time by pressing the
brake pedal, pressing the steering wheel ON/OFF control or pressing the
RES/CNCL control. In addition, you can temporarily increase the vehicle
speed above the current speed by manually pressing on the accelerator
pedal.
The controls for using your cruise
control are located on the steering
wheel.
Setting Adaptive Cruise Control
1. Press and release ON.
The information display will show
the gray indicator light, current gap
setting and SET.
2. Accelerate to the desired speed.
3. Press SET upward and release. The vehicle speed is stored in the
memory.
The information display will show a green indicator light,
current gap setting and desired set speed.
4. Take your foot off the accelerator pedal.
SET
RES
CNCL
ON
OFF
GAP
214 Cruise Control
2013 Edge (edg)
Owners Guide gf, 3rd Printing
USA (fus)