Using the systems, 222 driving aids – FORD 2013 Edge v.3 User Manual

Page 223

Advertising
background image

Note: When a vehicle passes quickly through the blind zone (typically
fewer than two seconds), the system does not trigger.

Using the Systems

BLIS® turns on when the engine is started and the vehicle is driven
forward above 3 mph (5 km/h); it remains on while the transmission is in
D (Drive) and N (Neutral). If shifted out of D (Drive) or N (Neutral),
the system enters CTA mode. Once shifted back into D (Drive), BLIS®
turns back on when the vehicle is driven above 3 mph (5 km/h).

Note: BLIS® does not function in R (Reverse) or P (Park) or provide
any additional warning when a turn signal is on.

CTA detects approaching vehicles from up to 45 feet (14 meters) away
though coverage decreases when the sensors are blocked. Reversing
slowly helps increase the coverage area and effectiveness.

WARNING: To help avoid personal injury, NEVER use the CTA
system as a replacement for using the interior and exterior

mirrors and looking over your shoulder before backing out of a parking
space. CTA is not a replacement for careful driving and only an assist.

In this first example, the left sensor is only partially obstructed; zone
coverage is nearly maximized.

222

Driving Aids

2013 Edge (edg)
Owners Guide gf, 3rd Printing
USA
(fus)

Advertising