Lighting, Lighting control, High beams – FORD 2013 Edge v.3 User Manual

Page 91: Headlamp flasher, Autolamps, 90 lighting

Advertising
background image

LIGHTING CONTROL

A. Off

B. Parking lamps, instrument panel
lamps, license plate lamps and tail
lamps

C. Headlamps

High Beams

Push the lever forward to switch the
high beams on.

Push the lever forward again or pull
the lever toward you to switch the
high beams off.

Headlamp Flasher

•Pull toward you slightly to activate
and release to deactivate.

AUTOLAMPS

WARNING: In severe weather conditions, it may be necessary to
switch your headlamps on manually.

Note: If the vehicle is equipped with autolamps, it will have the
windshield wiper rainlamp feature. When the windshield wipers are
turned to low- or high-speed wiping during daylight, and the headlamp
control is in the autolamp position, the exterior lamps will turn on after a
brief delay and will remain on until the wipers are turned off.

90

Lighting

2013 Edge (edg)
Owners Guide gf, 3rd Printing
USA
(fus)

Advertising