FORD 2013 Edge v.3 - Manual (Page 389)

4. Scroll to select from the following options:
If you select: You can:
Add Bluetooth
Device
*
See Using SYNC with your phone earlier in
this chapter for pairing instructions.
Connect Bluetooth
Device Connect a previously paired Bluetooth-enabled
phone.
1. Press OK to select and view a list of
previously paired phones.
2. Scroll until the desired device is chosen, then
press OK to connect the phone.
Note: Only one device can be connected at a
time. When another phone is connected, the
previous one is disconnected.
Set Primary Phone Set a previously paired phone as your primary
phone.
Press OK to select and scroll to select the
desired phone. Press OK to confirm.
Note: SYNC attempts to connect with the
primary phone at every ignition cycle. When a
phone is selected as primary, it appears first in
the list and is marked with an *.
Set Bluetooth
On/Off Turn the Bluetooth feature on and off.
Press OK and scroll to toggle between On and
Off. When the desired selection is chosen, press
OK.
Note: Turning Bluetooth off disconnects all
Bluetooth devices and deactivates all Bluetooth
features.
Delete Device Delete a paired phone.
Press OK and scroll to select the device. Press
OK to confirm.
Delete All Devices Delete all previously paired phones (and all
information originally saved with those phones).
Press OK to select.
Return Exit the current menu.
* This is a speed-dependent feature.
388 SYNC®
2013 Edge (edg)
Owners Guide gf, 3rd Printing
USA (fus)