FORD 2013 Taurus v.1 - Manual (Page 165)

To install a filter:
1. First, position the filter in its
housing making sure that the far
forward end is all the way up in the
housing.
2. Push in on the center of the
outside edge of the filter and rotate
up into the housing until it clips into
position.
REAR SEATS
Split-folding rear seat
WARNING: Before returning the seatback to its original position,
make sure that cargo or any objects are not trapped behind the
seatback. After returning the seatback to its original position, pull on
the seatback to ensure that it has fully latched. An unlatched seat may
become dangerous in the event of a sudden stop or collision.
One or both rear seatbacks can be folded.
• Lower: Pull the strap located on the
outboard side of the seatback to
release it, and then fold seatback
down.
• Raise: Pull up on the seat and push it
back until you hear it latch into place.
Seats 165
2013 Taurus
Owners Guide gf, 1st Printing
USA (fus)