FORD 2013 Taurus v.1 - Manual (Page 40)

Deactivating and activating the Belt-Minder
ா Feature
WARNING: While the design allows you to deactivate your
Belt-Minder
௡, this system is designed to improve your chances of
being safely belted and surviving an accident. We recommend you leave
the Belt-Minder
௡ system activated for yourself and others who may use
the vehicle. To reduce the risk of injury, do not deactivate/activate the
Belt-Minder
௡ feature while driving the vehicle.
Note: The driver and front passenger Belt-Minder
௡ are
deactivated/activated independently. When deactivating/activating one
seating position, do not buckle the other position as this will terminate
the process.
Read Steps 1 - 5 thoroughly before proceeding with the deactivation
and activation programming procedure.
Note: The driver and front passenger Belt-Minder
௡ features must be
disabled or enabled separately. Both cannot be disable or enabled during
the same key cycle.
Note: If you are using MyKey
௡, the Belt-Minder௡ cannot be disabled.
Also, if the Belt-Minder
௡ has been previously disabled, it will be
re-enabled during the use of MyKey
௡. Refer to the MyKey௡ chapter.
The driver and front passenger Belt-Minder
௡ features can be deactivated
and activated by performing the following procedure:
Before following the procedure, make sure that:
• The parking brake is set.
• The gearshift is in P (Park).
• The ignition is off.
• The driver and front passenger safety belts are unbuckled.
1. Switch the ignition on. DO NOT START THE ENGINE.
2. Wait until the safety belt warning light turns off (approximately one
minute).
3. Wait 10 seconds after the safety belt warning light turns off.
• Step 4 must be completed within 20 seconds after the completion of
Step 3.
40 Safety Belts
2013 Taurus
Owners Guide gf, 1st Printing
USA (fus)