FORD 2013 Taurus v.1 - Manual (Page 294)

Moving the Air Filter Assembly (EcoBoost™ engine)
WARNING: Do not run engine with the air filter disconnected.
1. Shut the engine off.
2. Clean the area around the clamp
that connects the air filter assembly
to the rubber hose (1).
3. Remove the bolt cover (if
equipped).
4. Remove two bolts that attach the air filter assembly to the front of the
vehicle (2).
5. Loosen the clamp holding the air filter assembly to the rubber hose
(1).
6. Remove the harness retaining clip by pulling up (3). Do not disconnect
the sensor (4).
294 Maintenance
2013 Taurus
Owners Guide gf, 1st Printing
USA (fus)