Tire pressure monitoring system, Tire pressure monitoring system (tpms), Wheels and tires 335 – FORD 2013 Taurus v.1 User Manual

Page 335

Advertising
background image

• Install tire cables securely, verifying that the tire cables do not touch

any wiring, brake lines or fuel lines.

• Do not exceed 30 mph (48 km/h) with tire cables on your vehicle.

• Drive cautiously. If you hear the cables rub or bang against your

vehicle, stop and retighten the cables. If this does not work, remove
the cables to prevent damage to your vehicle.

• Remove the tire cables when they are no longer needed. Do not use

tire cables on dry roads.

TIRE PRESSURE MONITORING SYSTEM

Each tire, including the spare (if provided), should be checked
monthly when cold and inflated to the inflation pressure
recommended by the vehicle manufacturer on the vehicle

placard or tire inflation pressure label.

As an added safety feature, your vehicle has been equipped with a tire
pressure monitoring system (TPMS) that illuminates a low tire pressure
telltale when one or more of your tires is significantly under-inflated.
Accordingly, when the low tire pressure telltale illuminates, you should
stop and check your tires as soon as possible, and inflate them to the
proper pressure. Driving on a significantly under-inflated tire causes the
tire to overheat and can lead to tire failure. Under-inflation also reduces
fuel efficiency and tire tread life, and may affect the vehicle’s handling
and stopping ability.

Please note that the TPMS is not a substitute for proper tire
maintenance, and it is the driver’s responsibility to maintain correct tire
pressure, even if under-inflation has not reached the level to trigger
illumination of the TPMS low tire pressure telltale.

Your vehicle has also been equipped with a TPMS malfunction indicator to
indicate when the system is not operating properly. The TPMS malfunction
indicator is combined with the low tire pressure telltale. When the system
detects a malfunction, the telltale will flash for approximately one minute
and then remain continuously illuminated. This sequence will continue
upon subsequent vehicle start-ups as long as the malfunction exists.

When the malfunction indicator is illuminated, the system may not be
able to detect or signal low tire pressure as intended. TPMS malfunctions
may occur for a variety of reasons, including the installation of
replacement or alternate tires or wheels on the vehicle that prevent the
TPMS from functioning properly. Always check the TPMS malfunction
telltale after replacing one or more tires or wheels on your vehicle to
ensure that the replacement or alternate tires and wheels allow the
TPMS to continue to function properly.

Wheels and Tires

335

2013 Taurus
Owners Guide gf, 1st Printing
USA
(fus)

Advertising