Using advancetrac, Stability control 209 – FORD 2013 Taurus v.1 User Manual

Page 209

Advertising
background image

USING ADVANCETRAC

The system automatically is enabled when you start your engine. The
ESC portion of the system is disabled when the transmission is in R
(Reverse) or, on SHO models, if the AdvanceTrac

௡ switch is pressed and

held for more than five seconds when the brakes are applied and the
vehicle is at a stop. The traction control portion of the system can be
turned off independently. See the Traction Control chapter.

AdvanceTrac

Features

Button
functions

Mode

icon

status

ESC

TCS

Default at
start-up

On during

bulb

check

Enabled

Enabled

Button pressed
momentarily

Traction

control off

On

Enabled

Disabled

Button pressed
twice; brakes
applied

Sport mode

(SHO with

performance

pack only)

On

Enabled

Enabled

Button pressed
and held more
than 5 seconds;
brakes applied;
no throttle

AdvanceTrac

Disabled

(SHO with

performance

pack only)

On

Disabled

Disabled

Button pressed
again after
deactivation

AdvanceTrac

fully enabled

Off

Enabled

Enabled

The SHO model is equipped with a sport mode which allows the driver to
reduce normal AdvanceTrac

௡ system intervention and provide a more

spirited driving experience. To enter sport mode, press the stability
control button twice rapidly with the brakes applied. The message
appears in the information display that the system is now in sport mode.

Note: Sport mode is not intended to be used on public roadways.

Stability Control

209

2013 Taurus
Owners Guide gf, 1st Printing
USA
(fus)

Advertising