Using the power lumbar support (if equipped), Dual setting heated seats (if equipped), Seating and safety restraints – FORD 2011 Explorer v.1 User Manual

Page 166

Advertising
background image

Using the power lumbar support (if equipped)

The power lumbar control is located on the outboard side of the seat.

Press the forward side of the control
to adjust firmness.

Press the rearward side of the
control to adjust softness.

Dual setting heated seats (if equipped)

The heated seats will only function when the ignition is in the on
position.

WARNING: Persons who are unable to feel pain to the skin
because of advanced age, chronic illness, diabetes, spinal cord

injury, medication, alcohol use, exhaustion, or other physical
conditions, must exercise care when using the seat heater. The seat
heater may cause burns even at low temperatures, especially if used
for long periods of time. Do not place anything on the seat that
insulates against heat, such as a blanket or cushion, because this may
cause the seat heater to overheat. Do not puncture the seat with pins,
needles, or other pointed objects because this may damage the heating
element which may cause the seat heater to overheat. An overheated
seat may cause serious personal injury.

Note: Do not do the following:
• Place heavy objects on the seat
• Operate the seat heater if water or any other liquid is spilled on the

seat. Allow the seat to dry thoroughly.

To operate the heated seats:

Press the heated seat symbol to
cycle through the various heat
settings and off. Warmer settings are
indicated by more indicator lights.

Seating and Safety Restraints

165

2011 Explorer (exp)
Owners Guide, 1st Printing
USA
(fus)

Advertising