Engine data, Engine drivebelt routing, Identifying your vehicle – FORD 2011 Explorer v.1 User Manual
Page 415: Safety compliance certification label, Maintenance and specifications
Advertising
ENGINE DATA
Engine
3.5L V6 engine
Cubic inches
213
Required fuel
Minimum 87 octane
Firing order
1-4-2-5-3-6
Ignition system
EDIS
Spark plug gap
0.052–0.056 inch
(1.32–1.42mm)
Compression ratio
9 .7:1
Engine drivebelt routing
IDENTIFYING YOUR VEHICLE
Safety Compliance Certification Label
The National Highway Traffic Safety
Administration Regulations require
that a Safety Compliance
Certification Label be affixed to a
vehicle and prescribe where the
Safety Compliance Certification
Label may be located. The Safety
Compliance Certification Label is
located on the structure (B-Pillar)
by the trailing edge of the driver’s
door or the edge of the driver’s
door.
Maintenance and Specifications
414
2011 Explorer (exp)
Owners Guide, 1st Printing
USA (fus)
Advertising