FORD 2011 Explorer v.1 - Manual (Page 48)

MODE CHANGE NOT ACCEPTED, RETRY (if equipped) —
Displayed when hill descent control mode cannot be changed at time of
driver request.
OFF ROAD MODE ENABLED (if equipped) — Displayed when off
road mode becomes active.
TERRAIN MANAGEMENT MUD, RUT MODE (if equipped) —
Displays driver selected terrain management mode.
TERRAIN MANAGEMENT NORMAL MODE (if equipped) —
Displays driver selected terrain management mode.
TERRAIN MANAGEMENT SAND MODE (if equipped) — Displays
driver selected terrain management mode.
TERRAIN MANAGEMENT SNOW MODE (if equipped) — Displays
driver selected terrain management mode.
TERRAIN MANAGEMENT SYSTEM FAULT (if equipped) —
Displays when the terrain management system detects an error.
ACCESSORY POWER ACTIVE (if equipped) — Displayed when the
vehicle is in the accessory ignition state for keyless vehicles.
CHECK SPEED DRIVE SAFELY — Displayed when a MyKey™ is in
use and the optional setting is on and the vehicle exceeds a preselected
speed. Refer to MyKey™ in the Locks and Security chapter for more
information.
COULD NOT PROGRAM KEY — Displayed when an attempt is made
to program a spare key using two existing MyKeys. Refer to MyKey™ in
the Locks and Security chapter for more information.
KEY PROGRAMMED 3 KEYS TOTAL — Displayed during spare key
programming, when a third Intelligent Access Key is programmed to the
system.
KEY PROGRAMMED 4 KEYS TOTAL — Displayed during spare key
programming, when a fourth Intelligent Access Key is programmed to
the system.
MAX NUMBER OF KEYS PROGRAMMED — Displayed during spare
key programming when the maximum number of keys have been
programmed.
MYKEY ACTIVE DRIVE SAFELY — Displayed when MyKey™ is
active.
Instrument Cluster
47
2011 Explorer (exp)
Owners Guide, 1st Printing
USA (fus)