Settings, Instrument cluster – FORD 2011 Explorer v.1 User Manual

Page 41

Advertising
background image

Settings

In this mode, you can configure different driver setting choices. Press
the right arrow key (when in the Settings menu) to reach the listed
modes below:

Note: Some items are optional and may not appear.

Driver Assist

Traction Control

On / Off

Blind Spot

On (default on key cycle) / Off

Collision Warning Sensitivity (if

MyKey™ is
programmed)

High / Normal / Low

Chimes

On (default on key cycle) / Off

Warn-<ON>

On (default on key cycle) / Off

Cross Traffic
Alert

On (default on key cycle) / Off

Cruise Control

Adaptive or Normal

Rear Park Aid

On (default on key cycle) / Off

Trailer Sway

On (default on key cycle) / Off

Vehicle

Autolamp Delay

Off, 10 / 20 (default setting) / 30 / 60 / 90 / 120 /
180 seconds

Easy Entry/Exit

On (default on key cycle) / Off

Fuel

DTE Calculation

Normal or Towing

Long Term Econ Hold OK to Reset...

Locks

Autolock,

On (default on key cycle) / Off

Autounlock

On (default on key cycle) / Off

Remote
Unlocking

All doors / Driver’s door

Menu Control

Standard / Memory On

Oil Life Reset

Set to 10–100%

Power Liftgate

Enable / Disable

Instrument Cluster

40

2011 Explorer (exp)
Owners Guide, 1st Printing
USA
(fus)

Advertising