Replacing front parking lamp/turn signal bulbs, Lights – FORD 2011 Explorer v.1 User Manual
Page 88
Advertising
Replacing front parking lamp/turn signal bulbs
1. Make sure that the headlamp
control is in the off position.
2. Open the hood.
3. Remove the hood overslam
bumper tower to service park/turn
bulb (if needed).
4. Rotate the bulb socket
counterclockwise and remove it
from the lamp assembly.
5. Pull the bulb straight out of the
socket.
Reverse steps to reinstall bulb(s).
Lights
87
2011 Explorer (exp)
Owners Guide, 1st Printing
USA (fus)
Advertising