Canon HDMI SX800 - Manual (Page 103)

103
Setting Various Function
Setting Up Functions fr
om
Menu
s
Registering a Password
[Other settings] - [Register password]
You can register a password for starting
projection.
Press the OK button after selecting [Reg-
ister password], and the following screen
for registering a password appears:
Enter a 4-digit password using [ ] / [<] /
[ ] / [>] (e.g.,
, <<<<, <>).
The 4-digit password is entered from the
left to right digits, the password is auto-
matically registered.
• Press the MENU button to abort the reg-
istration.
Resetting the Lamp Counter
[Other settings] - [Lamp counter]
You can reset the lamp counter that indi-
cates the timing to replace the projector
when you replace it.
Press the OK button after selecting [Lamp
counter], and the lamp counter is dis-
played.
Select the [Reset] and press the OK but-
ton.
HDMI COMPONENT
DIGITAL PC VIDEO/S-VIDEO
ANALOG PC USB
Other settings
System settings
Register password
<
<
< < < < <
<
HDMI COMPONENT
DIGITAL PC VIDEO/S-VIDEO
ANALOG PC USB
Do not reset the lamp counter except
when you have replaced the lamp. Oth-
erwise, the lamp counter cannot indi-
cate the correct timing for replacing the
lamp. For the details of the lamp
replacement, refer to the page
134 .
Other settings
System settings
Lamp counter