Canon HDMI SX800 User Manual
Page 122
Setting an IP Address (SX80)
122
4
Click [TCP/IP], enter appropriate values in the following field, and click the [OK] button.
[IP address]:
IP address of projector
[Subnet mask]:
Subnet mask of projector
[Default gateway]:
Default gateway of network
5
Click [Mail], enter appropriate values in the following field for the error report, and click
the [OK] button.
[To:]:
E-mail address to which error notification message is sent.
(Within 63 alphanumeric characters)
[Cc:]:
Second E-mail address to which error notification mes-
sage is sent (Within 63 alphanumeric characters, can be
omitted).
[From:]:
Sender of E-mail (projector)
[SMTP server IP address]: IP address of available SMTP server
[SNTP server IP address]: IP address of available SNTP server (can be omitted)
[Time zone]:
Time zone of installation site
[Mail resend interval]:
E-mail resend interval if the transmission has failed
Setting range: 0 – 59 seconds (factory default: 10 sec-
onds)
[Mail resend times]:
Number of resend times if the E-mail transmission has
failed
Setting range: 0 – 255 times (factory default: 3 times)
[Error report]:
ON/OFF of error message sending function. Select [ON].
[OFF] is the factory default.