Canon HDMI SX800 - Manual (Page 100)

Setting Various Function
100
Showing/hiding the Guide Screen
[Guide]
You can select whether to show or hide the
guide screen which explains operations.
Press the OK button to accept your setting
and then press the MENU button.
• [On] is the factory default.
• The guide screen is shown when:
- Power is turned off by pressing the
POWER button ( P66 ).
- No input signal can be detected
( P49 ).
- An invalid button is pressed in the
[BLANK], [FREEZE], or [D.ZOOM]
mode (
P68 , 70 ).
Turning on/off LED Illumination
[LED illumination]
You can select whether to turn on or off
LED illumination (
P26 ).
Press the OK button to accept your setting
and then press the MENU button.
• [On] is the factory default.
• LED illumination is unrelated to turning
on/off of the POWER or WARNING
lamp.
HDMI COMPONENT
DIGITAL PC VIDEO/S-VIDEO
ANALOG PC USB
Off Hides the guide screen.
On Shows the guide screen.
Guide
System settings
HDMI COMPONENT
DIGITAL PC VIDEO/S-VIDEO
ANALOG PC USB
Off Disables the LED illumination.
On Enables the LED illumination.
LED illumination
System settings