Hudson Robotics RapidWash - Manual (Page 10)

10
Figure 11
Dispense – Select the liquid number (1 or 2) and the desired volume, in uL
(Figure 12). Note: If the liquid (1 or 2) being dispensed has not been
primed into the dispense head, the RapidWash will automatically
perform a priming step prior to the first dispense step in the Wash
Program being run. Subsequently, if only that liquid is dispensed in
that Wash Program, the remaining dispense steps will execute without
another priming action.
Figure 12
Delay – Entered as seconds. During a delay the plate is moved away from the
manifold and the washer will not aspirate or dispense until the delay is
over (Figure 13).