Hudson Robotics RapidWash - Manual (Page 16)

16
by the number of wells (i.e. a volume of 9600 would lead to 9.6 mL dispensed
across a 96 well plate or 100 uL in every well). If run without the manifold
attached, volume dispensed will not match what is defined due to a different flow
rate without the head. On the run screen enter volume in uL and press “Run”.
Manual Move
– This feature is used to jog the dispense head (Y Axis) IN or OUT,
jog the plate nest (Z Axis) UP or DOWN, and OPEN/CLOSE the plate gripper on
track-based units. Three settings are available for the distance of each jog
movement: 0.1mm, 1mm or 10mm.