Canon Authorized Sen for ImageRUNNER Machines Version 4.1 - Manual (Page 65)

Authorized Send Installation and Configuration Guide for imageRUNNER Machines 65
3.5 Configuring the E-Mail Service Settings
You can configure the settings for the SMTP server.
NOTE
The E-Mail Service Settings must be configured to use the Scan to E-Mail and Scan
to Fax functions.
1. Click [E-Mail Service] ➞ [General].
If necessary, see the screen shot in step 5 of
"Flow of Configuration Operations," on
p. 35.
2. Configure the settings as necessary.
General Settings
SMTP Server
Enter the IP Address or DNS name of the SMTP server.
Address:
Port:
Enter the connecting port number of the SMTP server. You can
enter a maximum of five numbers. The default port number
is ‘25’.
Test:
Select this check box if you want the connection to the SMTP
server to be verified before you save the settings. The [Test]
check box is selected by default.
Enable SMTP
Select this check box to have the user authenticated on the
Authentication: SMTP server when using the Scan to E-Mail or Scan to Fax
function.