Contec Flexlan PC Card FX-DS-110-PCC - Manual (Page 11)

Introduction
FX-DS110-PCC
4
Handling Precautions
Take the following precautions when handling this product.
- Before inserting this PC card, check the configuration of the PC
card slot and make sure the card is oriented properly. Improper
insertion may result in a bad connection or damage to the card or
connector.
- Do not apply excessive force to the PC card connector as doing so
may result in a bad connection or damage to the card or
connector.
- This product contains precision electronic elements and must not
be used in locations subject to physical shock or strong vibration.
- Do not attempt to modify this device. The manufacturer will
bear no responsibility whatsoever for the device if it has been
modified.
- Do not use or store this device where it is exposed to direct
sunlight or near stoves or other sources of heat. (Operating
temperature range: 0° to 50°C)
- Do not use or store this device where it is exposed to dust or high
humidity. (Operating humidity range: 10 to 90%)
- Do not use or store this device near strong magnetic fields or
devices emitting electromagnetic radiation.
- Be careful not to let the external supply voltage or drive current
exceed the rating.
Precautions for Use
This product is classified as "wireless equipment for stations of
low-power data transmissions systems" under the Wireless
Telegraphy Act, and does not require a radio transmission license.
The law prohibits modification of the interior of this product.
Note also that this product is approved by the Japanese Wireless
Telegraphy Act and is not intended for use overseas.