Contec Flexlan PC Card FX-DS-110-PCC - Manual (Page 33)

Installation of a driver
FX-DS110-PCC
26
Installing for Windows 2000
(1) Windows 2000 detects the FX-DS110-PCC as a new piece of
hardware at startup and invokes the “Add New Hardware
wizard” with its dialog box. Click on “OK”.
(2) The “Install Hardware Device Drivers” dialog box will appear.
Select “Search for the best driver for your device”, then click
on “Next”.
(3) Select “Search for a suitable driver for my device”, then click
on “Next”.
(4) Check “Floppy disk drive” to “identify the driver file”. Insert
the "Driver Disk #1" floppy disk into the floppy disk drive,
then click on “Next”.
(5) The driver will be detected. Click on “Next” to install the
driver.
(6) Although the message “Digital Signature Not Found” appears,
there is no problem. Click on “Yes” to continue installing the
driver.
(7) Upon completion of copying the required files, the message
“Completing the Wizard” is displayed. Click on the “Finish”
button. You have now finished installing the driver.