Contec Flexlan PC Card FX-DS-110-PCC - Manual (Page 12)

Introduction
FX-DS110-PCC
5
Notes on Radio Interference
The frequency band used by this product covers the operating
frequencies of mobile-identification local radio stations (requiring
the license) and specific low-power radio stations (requiring no
license) as well as industrial, scientific, and medical equipment
such as microwave ovens.
1. Before using this product, make sure that there is no mobile-
identification local radio station or specific low-power radio
station operating near the product.
2. If the product should cause radio interference with any mobile-
identification local radio station or specific low-power radio
station, immediately change the operating frequency to avoid
the radio interference.
3. Contact your local retailer or CONTEC if the product has
trouble such as recurrent radio interference with mobile-
identification local radio stations or specific low-power radio
stations.
This product operates in the 2.4 GHz band
and uses DSSS for modulation. The
interfering distance is 40 mm.
Precautions Related to Electromagnetic Interference
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions : (1) this device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
This equipment complies with part 15 of the FCC rules. Any changes or
modifications not expressly approved by the manufacturer could void
the user’s authority to operate the equipment.
CAUTION: To comply with FCC RF exposure compliance
requirements, a separation distance of at least 5 cm must be
maintained between this device and all persons.
2.4 DS 4