Using the wizard to configure the auto-attendant – Cisco Linksys SPA9000 User Manual
Page 128
Advertising
5-4
Linksys SPA9000 Administrator Guide
Document Version 3.01
Chapter 5 Configuring the LVS Auto-Attendant
Configuring Auto-Attendant
Using the Wizard to Configure the Auto-Attendant
You can use the Setup Wizard to customize a schedule for Auto-Attendant. To do this, complete the
following steps.
Step 1
Select Auto Attendant from the Advanced Feature Menu (see
Figure 5-2
Auto Attendant Option
The system displays Page 1, shown in
Select Auto Attendant from the Advanced Feature Menu (see
Advertising