Cisco Linksys SPA9000 - Manual (Page 28)

1-14
Linksys SPA9000 Administrator Guide
Document Version 3.01
Chapter 1 Using the Linksys Voice System
SPA9000 Architecture
Configuration Options
This section describes the different methods for configuring the SPA9000. It includes the following
topics:
• Interactive Voice Response, page 1-14
• Setup Wizard
• Administration Web Server
• Local Client Configuration and Registration, page 1-15
• Remote Provisioning of the SPA9000, page 1-15
Interactive Voice Response
The Interactive Voice Response (IVR), which is strictly for administration purposes, lets you use an
analog phone to perform basic configuration and troubleshooting operations. To access the IVR, connect
an analog phone to an FXS port and press **** to access the IVR menu.
For detailed information about using the IVR, refer to the “Using the Interactive Voice Response
Interface” section on page 2-8 . A convenient quick-reference for the IVR is available at the following
website:
http://www.linksys.com/
Setup Wizard
The Setup Wizard is a convenient way to perform initial configuration for the SPA9000. It provides
step-by-step guidance for configuring the basic operation of voice services, voicemail, and most of the
main features provided by the SPA9000.
The Setup Wizard overwrites any existing configuration information that has been entered through the
administration web server, so it should not be used for ongoing administration and configuration unless
it provides adequate functionality for you to use it exclusively. You can, however, use the Setup Wizard
for initial configuration and then use the administration web server for ongoing configuration and
maintenance.
You can download the latest Setup Wizard from the following website:
http://www.linksys.com/
To start the Wizard, just double-click on the executable file. For information about getting started with
the Setup Wizard, refer to the
“Using the Wizard for Initial Configuration” section on page 2-13
Administration Web Server
The administration web server provides a series of web pages that let you enter detailed configuration
information for the many features and options provided by the SPA9000. It also lets you monitor the
status of the attached client stations.
The administration server provides a basic and an advanced view from which the various configuration
parameters can be accessed. The Provisioning tab is only visible from the advanced Administrator
account view of the web interface.
To access the administration web server, direct a browser to the Internet (WAN) interface of the
SPA9000. To determine this address, use IVR Option 110#.