Cisco Linksys SPA9000 - Manual (Page 77)

3-11
Linksys SPA9000 Administrator Guide
Document Version 3.01
Chapter 3 Configuring Voice Service and Voicemail
Configuring the SPA400 for PSTN Connectivity or Voicemail
Figure 3-13 SPA400 Disconnection Tone Settings
Step 7 Review the settings on this window and click OK.
The system displays the page shown in Figure 3-14 .
Figure 3-14 SPA400 Submit Confirmation
Step 8 Click Submit to save and activate your changes.
To complete the SPA9000 voicemail configuration, perform the steps described in the “Completing the
Voicemail Configuration” section on page 3-6 .
Using the Administration Web Server to Configure the SPA400
This section describes how to use the SPA400 and SPA9000 administration web servers. It includes the
following topics:
• Accessing the Administration Web Server, page 3-12
• Configuring the SPA400 to Connect to the SPA9000, page 3-12
• Configuring the SPA9000 to Register the SPA400, page 3-15