Cisco Linksys SPA9000 - Manual (Page 96)

4-6
Linksys SPA9000 Administrator Guide
Document Version 3.01
Chapter 4 Configuring SPA9000 Features
Using the Wizard to Configure SPA9000 Voice Features
Step 2 Configure the lines that you want to share and click Submit.
Configuring a Call Hunt Group
A hunt group is a number of extensions that ring when a number is dialed. The call is answered by the
first extension that picks up the call. Extensions can be alerted simultaneously or sequentially. See the
description of the <Hunt Groups> and the <Contact List> parameters about how to specify a hunting
rule. Note that <Contact List> is a per line interface parameter and is applicable to that line interface
only. For information about using the administration web server to configure hunt groups, see the
“Using
Call Hunt Groups” section on page 4-19 .
To use the Setup Wizard to configure a hunt group, complete the following steps.
Step 1 Select Hunt Group from the Advanced Feature Menu (see Figure 4-8 ).
Figure 4-8 Hunt Group Option
The system displays the page shown in Figure 4-9 .