Dell POWEREDGE M1000E - Manual (Page 1027)

Fabric OS Command Reference 999
53-1002746-01
supportShowCfgShow
2
supportShowCfgShow
Displays the groups of commands enabled for display by the supportShow command.
SYNOPSIS supportshowcfgshow
DESCRIPTION Use this command to display the groups of commands enabled for display by the supportShow
command. Use the supportShowCfgEnable and the supportShowCfgDisable commands to modify
which groups are displayed.
The FCIP commands are supported only on the Brocade 7800/FX8-24 platforms and cannot be
configured to collect or display data on unsupported platforms.
NOTES The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for
details.
OPERANDS None
EXAMPLES To display command groups configured for data collection on the Brocade 6510:
switch:admin> supportshowcfgshow
os enabled
exception enabled
port enabled
fabric enabled
services enabled
security enabled
network enabled
portlog enabled
system enabled
extend disabled
filter disabled
perfmon disabled
ficon disabled
iswitch disabled
asic_db enabled
fcip disabled (not applicable to this platform)
ag disabled
To display command groups configured for data collection on the Brocade 7800
switch:admin> supportshowcfgshow
os enabled
exception enabled
port enabled
fabric enabled
services enabled
security enabled
network enabled
portlog enabled
system enabled
extend disabled
filter disabled
perfmon disabled
ficon disabled