Dell POWEREDGE M1000E - Manual (Page 307)

Fabric OS Command Reference 279
53-1002746-01
fabStatsShow
2
fabStatsShow
Displays fabric statistics.
SYNOPSIS fabstatsshow
DESCRIPTION Use this command to display statistics for the fabric. The following information is displayed:
•
Number of times a switch domain ID has been forcibly changed
•
Number of E_Port offline transitions
•
Number of fabric reconfigurations
•
Number of fabric segmentations resulting from any of the following causes:
-
Loopback
-
Incompatibility
-
Overlap
-
Zoning
-
E_Port segment
-
Licensing
-
Disabled E_Port
-
Platform DB
-
Security incompatibility
-
Security violation
-
ECP error
-
Duplicate WWN
-
E_Port isolated
-
Admin Domain header conflict
-
Virtual Fabric Admin Domain conflict
-
MSFR/RD H&T WWN conflict (internal only)
-
Enhanced/Overlapping TI zones (ETIZ) Incompatibility
-
Exchange Switch Capabilities (ESC) detected conflict
-
Encryption conflict - Both ends are not configured for encryption
-
Compression conflict - Both ends are not configured for encryption
-
Encryp/Comp bw availability - Encryption or compression - Configured but lack of bandwidth in
the ASIC
For each recorded incident, the command provides the following additional information:
Count
The total number of times the specific event occurred on various ports on the
switch.
Port
The number of the port where the latest incident occurred. An arrow (<) next to the
port number denotes the type of event that occurred last.
Timestamp
The time when the latest incident occurred.