Dell POWEREDGE M1000E - Manual (Page 343)

Fabric OS Command Reference 315
53-1002746-01
fcpLogEnable
2
fcpLogEnable
Enables the FCPD debug information log.
SYNOPSIS fcplogenable
DESCRIPTION Use this command to enable Fibre Channel Protocol daemon (FCPD) logging. Debug information
logging is enabled by default.
NOTES The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for
details.
OPERANDS None
EXAMPLES To enable the FCPD debug information log:
switch:admin> fcplogenable
SEE ALSO fcpLogClear , fcpLogDisable , fcpLogShow