Dell PowerVault MD3260i - Manual (Page 211)

NOTE: This command must be run from the command line. It cannot be run in the MD Storage Manager script
editor.
Syntax
supportBundle auto show
Parameters
None.
Display Support Bundle Collection Schedule
Description
This command displays the schedule for collecting support bundles for all storage arrays.
NOTE: This command must be run from the command line. It cannot be run in the MD Storage Manager script
editor.
Syntax
supportBundle schedule show
Parameters
None.
Download Enclosure Management Module Firmware
Description
This command downloads firmware for the enclosure management module.
Syntax
download (allEnclosures | enclosure [enclosureID])
firmware file="filename"
Parameters
Parameter Description
enclosure Identifies the enclosure to which to load new firmware.
Enclosure ID values are 0 to 99. You must put brackets
([ ]) around the enclosure ID value.
You can use the following parameters:
211