Dell PowerVault MD3260i - Manual (Page 268)

Parameters
Parameter Description
diskPools The list of diskPoolNames identifies multiple physical disk
pool which have their parameters reset by the command.
allDiskPools This parameter specifies that all physical disk pools have
their parameters reset by the command.
reservePhysicalDiskCount This value is specified in terms of the number of physical
disks to reserve in the disk pool for physical disk failures
or physical disk removals.
warningThreshold The percentage of disk pool capacity at which you receive
a warning alert that the disk pool is nearing full capacity.
Use integer values. For example, a value of 70 means 70
percent. For best operation, the value for this parameter
must be less than the value for the
criticalThreshold parameter. Setting this
parameter to 0 disables warning alerts.
criticalPriority This parameter governs the priority for critical
reconstruction activities on the disk pool.
backgroundPriority This parameter governs the priority for background task
activities on the disk pool.
Set Disk Pool Complete
Description
This command sets a disk pool that is in an Incomplete state to the Complete state.
Syntax
set diskPool [diskPoolName] complete
Parameter
Parameter Description
diskPool The alphanumberic identifier of the disk pool (including –
and _) that you want to set to a Complete state. Enclose
the
diskPoolName in square brackets ([ ]).
268