Dell PowerVault MD3260i - Manual (Page 377)

Parameter Description
square brackets ([ ]). If the remote replication group name
has special characters, you also must enclose the remote
replication group name in double quotation marks (" ")
inside square brackets. If the remote replication group
name consists only of numbers, such as "1002," you also
must enclose the remote replication group name in double
quotation marks (" ") inside square brackets.
Suspend SSD Cache
Description
This command stops caching for all virtual disks that are using the SSD cache. Use this command to temporarily stop
caching using the SSD cache. While caching is stopped, host reads are serviced from the base virtual disks instead of
the SSD cache.
Syntax
suspend ssdCache [ssdCacheName]
Parameter
Parameter Description
ssdCache The alphanumeric identifier (including - and _) of the SSD
cache that you want to suspend. Enclose the identifier in
square brackets ([ ]). If the SSD cache name contains
special characters or consists only of numbers, you also
must enclose the identifier in double quotation marks (" ")
inside square brackets.
Notes
To restart caching, use the resume ssdCache command.
Test Remote Replication Group Connectivity
Description
This command tests possible communication problems between the local storage array and the remote the storage
array associated with a remote replication group.
Syntax
diagnose asyncRemoteReplicationGroup ["asyncRemoteReplicationGroupName"]
testID=(all | connectivity | latency | bandwidth | portConnections)
377