Setting up a printer – Dell Dimension 4700C User Manual
Page 13
Advertising
Setting Up and Using Your Computer
13
4 Tighten the screw.
5 Place the computer in the upright position.
To remove the stand:
1 Turn the computer over so that the stand is at the top.
2 Loosen the screw and lift the stand away.
3 Place the computer in a horizontal position until you reattach the stand.
Setting Up a Printer
NOTICE:
Complete the operating system setup before you connect a printer to the computer.
See the documentation that came with the printer for setup information, including how to:
•
Obtain and install updated drivers.
•
Connect the printer to the computer.
•
Load paper and install the toner or ink cartridge.
•
Contact the printer manufacturer for technical assistance.
Advertising