Dell Dimension 4700C User Manual
Page 77
Removing and Installing Parts
77
c
To release the modem connector, gently open the tabs on each side of the external clip
that holds the external modem connector in place.
d
Lift the modem cable and connector from the computer.
5 To install a new modem cable and external modem connector:
a
Align the external connector with the slot on the back on the computer.
b
Press on each side of the external clip and secure the external modem connector in place.
c
Push on the back of the modem connector to make sure that the external clip completely
engages and fits tightly against the back of the computer.
d
Place the modem cable and ground wire in the cable clip and secure the clip to the
computer chassis with the screw.
e
Carefully route the cable and ground wire around the processor making sure that you
keep the wires away from any internal parts.
6 Attach the modem cable and ground wire to the modem:
a
Connect the modem cable to the modem.
b
Replace the screw that secures the ground wire to the modem and system board.
7 Align the fan with the holes on the heat sink and replace the two screws.
8 Close the computer cover (see page 80).
screw
cable clip
exposed ground wire
modem cable
modem connector
tabs (2)
chassis hole
external clip