Dell Dimension 4700C User Manual
Page 69
Removing and Installing Parts
69
5 Prepare the card for installation.
See the documentation that came with the card for information on configuring the card,
making internal connections, or otherwise customizing it for your computer.
CAUTION:
Some network adapters automatically start the computer when they are connected to a
network. To guard against electrical shock, be sure to unplug your computer from its electrical outlet
before installing any cards.
6 If you are installing the card into the x16 card connector, position the card so the securing slot
is aligned with the securing tab, and gently pull the securing tab.
7 Place the card in the connector and press down firmly. Ensure that the card is fully seated in
the slot.
8 Ensure that:
•
The tops of all cards and filler brackets are flush with the alignment bar.
•
The notch in the top of the card or filler bracket fits around the alignment guide.
fully seated
card
not fully
seated card
bracket caught
outside of slot
bracket
within slot