Sony DHC-MD313 - Manual (Page 17)

Recording from the
radio
You can record a radio programme on an
MD. If you use an MD with tracks already
recorded on it, the MD deck automatically
locates the end of the recorded section of tire
MD and starts the new recording from fhere.
To record after erasing all tracks on an MD,
see page 39.
To turn on the system, press POWER.
MD indicator
2 5 4
1
Insert a recordable MD.
With the
arrow pointing
toward the
deck.
With the
label side up
and the
shutter slide
rightward.
2
Press TUNER / BAND (or BAND on
the remote) repeatedly until the
band you want appears.
4
Press TUNING + or - (or PRESET
+ or - on the remote) to select the
desired station's preset number.
Frequency or the The
preset station name* preset
or RDS station** number
* The titles you entered appear
sequentially (see "Labelling the preset
station" page 45).
** European model only.
Press # REC.
The MD stands by for recording and
REC button is lit red.
Press MD ODD (or MD O or
MDII on the remote).
Recording starts.
To stop recording
Press MD □.
To record non-preset radio
stations
To record non-preset stations, press
TUNING MODE repeatedly until
"MANUAL" appears in step 3, then press
TUNING -t or - to tune in the desired station.
Tip
If noise is heard while recording an AM radio
station, reorient the AM loop aerial to reduce the
noise.
n
at
S'
O
■o
«
■>1
tt
r*
o'
3
w
3
Press TUNING MODE repeatedly
until "PRESET" appears.
continued
17