Step 1: hooking up the system, Stepl: hooking up the system, Getting stprted – Sony DHC-MD313 User Manual
Page 4
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Getting Stprted
Step 1: Hooking up the system
IVrfomi the followini; procedure Q to Q to liook up \ our s\ stem usinp the supplied cords und
ueeessories. To eoiriplete tire setup, do steps 2 und 3 ulso.
AM loop aerial
Connect the speakers.
Connect the speaker cords to SPEAKER
terminals of the same colour.
Keep the speaker cords away from the
aerials to prevent noise.
Connect the FM/AM aerials.
Set up the AM loop aerial, then connect
it.
European model
Extend the FM
wire aerial
horizontally
Advertising